Guatemala - Los Moritas
Location: San Antonio La Paz, El Progreso
Process Station: Beneficio La Esperanza
Producer: Higinio Gomez
Growing Altitude: 17-1900 MASL
Processing Method: Washed
Harvest: December 2017 - February 2018
Product: Filter and Espresso
Flavour Notes: Honey, Cantelope & Florals
Situated on the Sierra de Las Minas mountain range in the El Progreso district, Finca Los Moritas boasts 60 beautiful hectares of growing area at a high altitude of between 1700 and 1900 metres above sea level. With excellent limestone rich soil, and a microclimate of dense humid forests of pine, this finca produces excellent Bourbon and Pache San Ramon varietals, however in this case we have chosen to work with their excellent lot of Pacamara.
Producer and owner Higinio Gomez and his wife Aura have been prominent farmers within the community for over forty years, and are both very active in the community leading an organisation within the community seeking to improve the quality of coffee grown across the region.
Espresso Roast Brewing Advice:
Use a 1:2.4 brew ratio. With all espresso you must first identify the size of your filter basket - preferably of the brand and variety 'VST 'Ridgeless' - that you are using. For this particular coffee, the optimal dose would be -2g from the basket size, using a 1:2.4 ratio, and aiming for a target TDS of 8.4. Depending on which grinder and set-up you're working with, the result will be varied however our recommended total brew time is still between 27 - 29 seconds brewing this coffee.
Filter Roast Brewing advice:
Use a 1:15 brew ratio using the V60 brewer from Hario, aiming for a TDS of 1,35 or slightly higher for a clean and transparent yet rich brew. When working with this coffee, we recommend experimenting with a coarser grind than you may usually use rather than a traditionally finer filter grind setting.
We begin our brews with a blooming process, which indicates saturating your dry grounds with brew water, in this case roughly twice the volume of the dry dose. For this coffee, we are not agitating the grinds but resting the bloom for 40 seconds from the initial pour.
After the bloom stage of the brew is complete (40s), begin to pour once again whilst agitating the coffee grinds, pouring in clockwise circular motion and creating turbulence within the brewer. This will help to increase the strength of your brew and this method pairs well with the coarser grind setting mentioned earlier. Pour in intervals, with a maximum of 6 pulses per recipe. Calculate the appropriate amount of brew water for each pulse pour for the size of your brew, and maintain consistently timed pours and intervals.
For example, a recipe with a 20g dry dose and 300g of brew water would require pours of 50g of brew water per pulse pour, with an appropriate pulse pour interval of 30 seconds (Bloom, 0:40, 1:10, 1:40, 2:10, 2:40).
Brew with a water temperature at 92'C degrees and attempt to find a water with a total hardness of around 80 ppm. This should equate to a deliciously juicy and clean cup of coffee, with vibrant acidity as well as a rich sweetness and silken body.